Many machining factories struggle with tool vibration, unstable workpiece dimensions, low productivity and frequent machine failures during mass production of precision parts. The KIA VX380Ti drilling and tapping center perfectly solves these common industry pain points and has become a mainstream model for small and medium-sized precision processing workshops. The machine adopts an integrated thick high-rigidity cast iron bed, which greatly enhances overall stability and shock resistance. During high-speed drilling, tapping and milling processes, it effectively suppresses cutting vibration and avoids surface vibration lines. It ensures highly consistent size accuracy for mass-produced aluminum parts, hardware accessories and miniature mechanical components, greatly reducing defective products and production costs. Equipped with a reliable Mitsubishi CNC system, the machine supports intelligent precision compensation and servo overload protection. It runs stably for long-term two-shift and three-shift continuous production, with extremely low failure rates and almost no unexpected shutdowns. The high-performance BT30 high-speed spindle features fast acceleration and deceleration and stable rigid tapping performance, effectively preventing tap breakage, thread damage and tool burning during high-frequency tapping work. Matched with a high-precision disc tool magazine, the machine realizes fast and accurate automatic tool change. It rarely causes tool jamming, tool dropping or positioning errors. It greatly shortens auxiliary processing time and significantly improves overall workshop production efficiency. Featuring a compact body design, the machine saves factory space. The inclined bed structure achieves smooth chip removal and avoids debris accumulation. The circulating cooling system works stably for a long time to ensure excellent workpiece surface finish. The whole machine is easy to operate and simple to maintain. New operators can master basic operation and programming quickly, lowering enterprise training costs. Widely applicable for 3C electronic parts, precision hardware, medical device accessories and small mold processing, the KIA VX380Ti balances high precision, high efficiency and ultra-high cost performance, helping processing factories stabilize quality, increase output and accelerate capital return. FAQ 1. Is the KIA VX380Ti suitable for long-term mass production?Yes. With high rigid body and wear-resistant core parts, it supports 24-hour uninterrupted mass production with stable precision and low attenuation. 2. Does the machine easily break taps during tapping?No. It features synchronous spindle and Z-axis control, stable rigid tapping and good cooling effect, which greatly reduces tap breakage. 3. Is it friendly for new operators?Absolutely. The Mitsubishi system has a simple interface and standard machining cycles, making it easy to learn and operate. 4. Is daily maintenance complicated?No. It has automatic lubrication, smooth chip removal and a stable cooling system, requiring only simple daily inspection and cleaning.

Yes. This used Brother S700Z2N tapping center is listed under stock number 812566 in China, with the 2022 build year and key working specifications already provided, so buyers can move straight to inspection planning instead of first requesting basic machine details. For buyers comparing compact, high-speed machining options, it is ready for serious evaluation as an in-stock machine. What listing details show the Brother S700Z2N is inspection-ready? A machine is easier to inspect when the listing already covers the first questions a buyer will ask. In this case, the main commercial and technical details are available: brand, model, stock number, year, origin, location, and core configuration. This machine is a Brother S700Z2N made in Japan, built in 2022, and located in China under stock number 812566. That gives buyers enough detail to move from online review to arranging an on-site inspection or video inspection. Brand:  Brother Model:  S700Z2N Machine Type:  Tapping Center Stock Number:  812566 Year:  2022 Origin:  Japan Travel:  700 x 400 x 300 mm Table Size:  800 x 400 mm Spindle Speed:  10000 rpm Spindle Taper:  BT30 Tool Capacity:  14 tools Rapid Traverse:  50 x 50 x 56 m/min Machine Weight:  2450 kg These details matter because inspection readiness is not only about whether a machine is in stock. It also depends on whether the seller has provided enough information for the buyer to judge suitability, prepare technical questions, and decide whether the machine is worth a site visit, remote run-off, or formal negotiation. How does the S700Z2N fit real production use before you commit? The Brother S700Z2N is the type of compact vertical tapping center buyers often shortlist when they need one machine that can cover a range of jobs rather than a very narrow single-part application. With 700 x 400 x 300 mm travel, an 800 x 400 mm table, a BT30 spindle, 10,000 rpm spindle speed, and a 14-tool magazine, it suits small to medium precision work where fast cycle times and simple tool changes matter more than heavy cutting on large parts. That makes it a practical option for mixed production environments such as automotive brackets and housings, aerospace aluminum components, mold electrodes and plate work, medical device parts, and electronics fixtures or precision plates. The appeal is not just general marketing language; it comes from the machine's balanced size, compact footprint, and speed-oriented configuration. Buyers looking for a versatile machine can assess it as a flexible shop-floor asset rather than only a dedicated tapping unit. The rapid traverse rates of 50 x 50 x 56 m/min also indicate a machine set up for efficient movement between operations, which is important when cycle time affects the buying decision. For buyers, that means the inspection should focus on whether the machine still performs consistently in the short-run or repeat-batch work common across multiple industries. What should a buyer verify during inspection or negotiation? Since the listing already confirms the machine identity and base specifications, the next step is not asking broad introductory questions. It is verifying actual performance against your own parts and process requirements. For this Brother S700Z2N, the most useful inspection points tie directly to the published specifications. Confirm that the full three-axis travel is available and usable for your actual work envelope. Check whether the 800 x 400 mm table matches your fixture size and part loading method. Run the spindle through its speed range up to 10,000 rpm and listen for unusual vibration or noise. Inspect the BT30 tool interface condition and test the 14-tool magazine for stable indexing and tool change action. Review machine movement at the listed rapid traverse rates to judge response, smoothness, and repeatability. Use the machine dimensions and 2450 kg weight to confirm delivery access, rigging, and installation planning. From a negotiation standpoint, this gives buyers a stronger position than starting from an incomplete listing. Because the key specifications and location are already stated, discussions can stay focused on inspection results, process suitability, and logistics. That usually supports faster decision-making, especially for buyers who need a compact machining solution with flexibility across industries. Related Questions Is the Used Brother S700Z2N available for inspection? Yes. It is listed as stock number 812566 in China, with the year, origin, and core operating specifications already provided for buyer review. Is this Brother S700Z2N currently identifiable as in-stock equipment? Yes. The stock number and physical location show that it is being offered as a specific machine, not a general model listing. Is the Brother S700Z2N suitable for different industries? Yes. Its BT30 spindle, compact table, and fast traverse rates make it relevant for automotive, aerospace, mold making, medical device, and electronics work. What delivery factors should be checked before purchase? Confirm transport and installation planning based on the listed machine size of 2497 x 2050 x 2223 mm and machine weight of 2450 kg.

The Doosan T4005 drill tap center has become a well-known choice among contract manufacturers and component producers who need a compact, high-productivity CNC machine. This 2023 unit,  listed under stock number 812394, provides 520 mm X-axis travel, a 12,000 rpm BT30 spindle, and a 21-tool magazine. It is a production-ready solution for shops machining small to medium‑sized precision parts across automotive, electronics, medical device, aerospace, and mold making sectors. Because the machine is in stock and available for immediate inspection, it avoids the long lead times typical of new equipment orders — a critical advantage for production planners looking to expand capacity now. Stock Status and buying value The current availability of this Doosan T4005 presents a rare opportunity for procurement teams. As a 2023 machine with limited use, it is in near-new condition — but without the typical 8‑12 week factory order lead time. The unit is located at a partner facility, where an inspection can be arranged at short notice. Stock number 812394 provides full traceability in our inventory system. For factory owners and production managers evaluating a near-term capacity expansion, immediate availability means shorter project timelines and a faster return on investment. From a cost perspective, buying a used 2023 Doosan T4005 drill tap center typically involves considerably lower capital expenditure than ordering a new equivalent, while still offering the latest-generation Mitsubishi M80 control and the robust Doosan build quality. This combination of nearly new performance and immediate availability makes the unit a practical choice for both expanding shops and replacement buyers. ✓ In Stock — Available Now Key Specifications and Production Readiness Rather than simply listing figures, it's useful to understand how each specification impacts daily production flow, tooling compatibility, and part quality. Here is a breakdown of the key data and what it means on your shop floor. CNC CONTROL: Mitsubishi M80 X/Y/Z TRAVEL: 520 × 400 × 350 mm TABLE SIZE: 650 × 400 mm SPINDLE SPEED: 12,000 rpm SPINDLE TAPER: BT30 TOOL MAGAZINE: 21 stations Control system. The Mitsubishi M80 is known for fast processing and an operator-friendly interface. Maintenance technicians and programmers can integrate the machine quickly into an existing production line with minimal retraining — a practical advantage when adding a used machine mid-project. Work envelope. With travels of 520 mm in X, 400 mm in Y, and 350 mm in Z, the T4005 accommodates a broad range of workpiece sizes common in automotive sensor housings, electronic connector bodies, small medical implants, and general industrial components. The 650 × 400 mm table provides ample space for dedicated fixture plates or multiple vise setups, supporting both single-part runs and small-batch production. Spindle and tooling. The 12,000 rpm BT30 spindle is key to the machine's speed. BT30 tooling is lightweight and accelerates quickly, which is ideal for high-cycle drilling and tapping operations in aluminum, brass, and mild steel. This spindle taper also helps keep tooling costs under control — BT30 holders are widely available and less expensive than larger taper equivalents. The 21‑tool magazine allows a single setup to handle drilling, tapping, light milling, and chamfering unattended, improving both throughput and consistency. Production readiness. Because the machine is already located in China with these specifications, it can go from inspection to shipment to installation in days rather than months. For a buyer who has existing orders waiting for machine capacity, that speed is just as important as any technical spec. Frequently Asked Questions 1. What is the current stock status of this Doosan T4005 drill tap center? The machine is in stock at our facility under inventory number 812394. It is a 2023 unit and available for immediate inspection and purchase. As this is a single-unit item, availability can change quickly — we recommend confirming stock status when you inquire. 2. Can I inspect the used Doosan T4005 before making a purchase decision? Yes, inspection is encouraged. The machine is accessible at our facility, and we can schedule an appointment for you or your technical team to carry out spindle checks, axis tests, tool changer cycling, and control verification. You are welcome to bring your own test equipment and sample programs. 3. What kinds of parts are best suited to the Doosan T4005? The T4005 is ideal for small to medium‑sized precision parts requiring multiple drilled and tapped holes, light milling, and chamfering. Typical examples include automotive sensor housings, electronic connectors, medical bone plates, mold ejector plates, and aerospace aluminum fittings. Its 520 × 400 × 350 mm work zone and BT30 spindle make it a strong fit for high‑mix, medium‑volume production across many industries. 4. How well does the 12000 rpm BT30 spindle perform in daily production? The 12,000 rpm BT30 spindle is built for rapid drilling and tapping cycles, especially in aluminum, brass, and free-machining steels. BT30 toolholders are lightweight and accelerate quickly, reducing cycle time on small tools. For shops that run many holes and threads, this spindle configuration delivers both speed and consistent accuracy. 5. What are the most important things to check when evaluating this used drill tap center? Focus on spindle taper condition, axis backlash, tool changer reliability, control functionality (Mitsubishi M80), and coolant system performance. A 2023 machine with limited use should pass these checks without issue, but verifying them in person gives you confidence that the machine can run production parts immediately. 6. How soon can this machine be shipped after an inquiry? Once the purchase is confirmed and logistics are arranged, the Doosan T4005 can be prepared for shipment quickly — typically in a matter of days, not weeks. Because the machine is already located in China, a major manufacturing and logistics hub, both domestic and international freight arrangements are straightforward. We will provide an exact timeline based on your destination and shipping method.

The used FANUC α-D21MiB PLUS is a premier high-speed drill tap center designed to deliver exceptional versatility and precision across multiple manufacturing sectors. Equipped with a high-performance 24,000 RPM spindle, a 21-station tool magazine, and a highly rigid 500x400x330mm machining envelope, this 2022 model is engineered for rapid material removal and fine surface finishing. It is an ideal solution for factories operating in the automotive, aerospace, medical device, electronics, and mold making industries. Currently located under stock number 68139, this machine is in stock, ready for immediate inspection, and offers a strategic opportunity to bypass long OEM lead times while securing a highly capable production asset. Key Specifications and Production Readiness Understanding the technical parameters of the FANUC α-D21MiB PLUS is crucial for determining its fit within your existing production lines. Every specification on this machine is engineered to reduce cycle times and improve part quality. Brand & Model FANUC α-D21MiB PLUS Manufacturing Year 2022 CNC System FANUC 31i-MODEL B Spindle Speed 24,000 RPM X/Y/Z Axis Travel 500 x 400 x 330 mm Table Size 650 x 400 mm Table Load Capacity 300 kg Tool Magazine Capacity 21 Stations Positioning Accuracy ±0.006 mm Repeatability ±0.004 mm Machine Dimensions 1615 x 2040 x 2236 mm FANUC 31i-MODEL B CNC System The machine is driven by the industry-standard FANUC 31i-MODEL B control. This system is renowned for its ultra-fast block processing times and advanced look-ahead capabilities. In real production, this means the machine can execute complex 3D toolpaths without hesitation, preventing dwell marks on the workpiece and ensuring superior surface finishes, which is highly critical for mold inserts and aerospace components. 24,000 RPM High-Speed Spindle While standard drill tap centers often feature 10,000 or 14,000 RPM spindles, this specific model is equipped with a 24,000 RPM spindle. This high rotational speed is essential for micro-machining, allowing the use of very small diameter end mills and drills without sacrificing feed rates. It ensures optimal chip evacuation and prevents tool breakage when machining aluminum, copper, or titanium. Machining Envelope and Tooling Capacity The 500x400x330mm X/Y/Z travel, combined with a 650x400mm table capable of supporting 300 kg, provides a highly versatile work area. It is perfectly sized for mounting multiple pneumatic vises, 4th-axis rotary tables, or complex custom fixtures. The 21-station tool magazine utilizes a rapid turret-style indexing mechanism, drastically reducing chip-to-chip times. In high-volume production runs, saving even a fraction of a second per tool change compounds into hours of saved production time per week. Precision and Repeatability With a positioning accuracy of ±0.006 mm and a repeatability of ±0.004 mm, this machine guarantees tight tolerances part after part. This level of precision ensures high Cpk values in mass production, directly reducing scrap rates and eliminating the need for secondary manual finishing operations. Frequently Asked Questions Is the used FANUC α-D21MiB PLUS currently in stock and available for inspection? Yes, this specific machine (Stock #68139) is currently in stock at our facility. It is fully powered and available now for comprehensive on-site inspection and test cutting by your engineering team. What throughput requirements is the 24,000 RPM spindle best suited for? The 24,000 RPM spindle is engineered for high-speed, high-volume throughput requirementss. It is particularly suited for applications requiring small diameter cutting tools, such as 3C electronics housings, medical devices, and fine mold electrodes, allowing for aggressive feed rates while maintaining excellent surface finishes. Can this machine handle mold making as well as high-volume electronics parts? Absolutely. The machine's "one machine, many applications" flexibility is one of its core strengths. The FANUC 31i-MODEL B control handles the complex 3D toolpaths required for mold making, while the rapid 21-station tool changer and fast axis movements support the short cycle times demanded by high-volume electronics manufacturing. What should I check during the on-site inspection ? During your inspection, you should prioritize checking the spindle runout at maximum RPM, verifying the smoothness of the 21-station tool change mechanism, inspecting the X/Y/Z ballscrews for backlash, and confirming the machine's geometry to ensure it still meets the ±0.004 mm repeatability specification. Does the FANUC 31i-MODEL B control support complex 3D contouring? Yes, the FANUC 31i-MODEL B is a highly advanced CNC system that features rapid block processing and look-ahead capabilities. This ensures smooth and precise execution of complex 3D contouring programs, preventing dwell marks and ensuring high-quality surface finishes on intricate parts.

This 2014 Doosan TC400 Drilling and Tapping Center is in-stock and available for immediate inspection at our facility. Engineered for high-speed, high-precision production, this machine features a 520 x 400 x 350 mm work envelope and a reliable 10,000 rpm BT30 spindle. Equipped with the industry-standard Fanuc Oi-MD control, it provides a robust platform for manufacturers looking to optimize cycle times while maintaining consistent part quality. Whether you are scaling up production for small-to-medium components or looking to maximize floor space with a versatile workhorse, this unit is ready for evaluation. Stock Status and buying value This Doosan TC400 (Stock No: 811948) is physically located in our warehouse, eliminating lead times associated with factory-to-port shipping or manufacturing delays. In the current market, acquiring a proven platform like the TC400 allows production managers to deploy capacity immediately. The value of this unit lies in its combination of the reliable Fanuc Oi-MD interface—familiar to operators worldwide—and the compact, high-speed architecture characteristic of Doosan drilling/tapping centers. This machine is an ideal solution for shops aiming to reduce cycle times on smaller parts. Unlike heavy-duty milling centers that may be overkill for high-volume, light-duty work, the TC400 is optimized for speed. Purchasing this used unit provides a cost-effective route to increasing throughput without the capital expenditure of a new machine. Key Specifications and Production Readiness Reviewing the technical parameters is essential to confirming this machine fits your current tooling and part requirements. The TC400 is configured for agility and rapid production. Model: Doosan TC400 Year: 2014 CNC System: Fanuc Oi-MD X/Y/Z Travel: 520 × 400 × 350 mm Spindle Taper: BT30 Spindle Speed: 10,000 rpm Tool Capacity: 14 Stations The 10,000 rpm BT30 spindle is the core of this machine's performance, specifically designed for light milling, drilling, and tapping operations. The 14-station tool changer ensures that complex parts with multiple hole patterns or varying drill sizes can be processed in a single setup. The 520mm X-axis travel provides sufficient room for standard fixture plates, making it a highly adaptable machine for various production environments. Ideal Applications The Doosan TC400 is a versatile performer, excelling in environments where part variety and throughput requirements are critical. It is well-suited for several key industries: Electronics Manufacturing: Ideal for machining small aluminum or plastic casings, heat sinks, and connectors requiring high-speed drilling and tapping. Medical Device Production: Suitable for small-batch or high-volume production of surgical instrument components and small housings requiring precision finishes. Automotive Tier 2/3 Suppliers: Perfect for small brackets, fasteners, and interior components that demand rapid cycle times. Mold & Die Shops: Excellent as a secondary machine for electrode production or small cavity/core detailing, freeing up larger machines for heavy-duty work. If your production floor is currently bottlenecked by small-part drilling or tapping, or if you need to dedicate a machine to a specific high-volume product line, the TC400 is a logical, high-ROI addition. Why This Machine is worth considering In the used machinery market, finding a 2014 Doosan TC400 in good condition is a prime opportunity to acquire a proven, reliable asset. The Doosan brand is widely recognized for rigid construction and longevity, even in high-speed applications. This machine is not just a purchase; it is a tool to stabilize and increase your production capacity. Because it is currently in stock, we can facilitate a quick inspection and shipment process. For production managers looking to optimize their floor layout, the TC400 offers a compact footprint without sacrificing the travel distances required for most small-to-medium part machining. Frequently Asked Questions Q: Is this machine available for inspection in? A: Yes, this machine is currently in our warehouse and is available for inspection. Please contact us to schedule a time to see it under power. Q: What type of parts is the TC400 best suited for? A: The TC400 is a drilling and tapping center, making it ideal for small-to-medium parts, especially those requiring high-speed drilling, tapping, and light milling. It is highly effective for electronics components, medical devices, and small automotive parts. Q: Does the Fanuc Oi-MD control support modern CAD/CAM software? A: Yes, the Fanuc Oi-MD is a standard, widely supported control system that is fully compatible with modern CAD/CAM software workflows, ensuring easy integration into your existing programming environment. Q: How does the BT30 spindle impact my production? A: The BT30 spindle is designed for high-speed, light-duty operations. It allows for faster tool changes and higher spindle speeds compared to larger BT40 machines, significantly reducing cycle times for drilling and tapping tasks.

In today's highly competitive industrial manufacturing landscape, optimizing production efficiency while strictly controlling capital expenditure is the primary goal for factory managers and business owners. Finding equipment that delivers high-precision machining without the hefty price tag of a brand-new unit is a strategic necessity. The Doosan brand is globally recognized for engineering machine tools that offer superior rigidity, precision, and longevity. The Doosan T-4050 model perfectly embodies these traits, boasting a suite of high-end specifications that make it a formidable asset on any shop floor. For companies planning to upgrade their machining capabilities or establish new production lines, understanding the technical nuances of this specific used machine tool is crucial for making an informed investment. In the following sections, we will conduct a deep dive into the core features and operational advantages of this remarkable equipment. Unpacking the Core Specifications of the Doosan T-4050 When evaluating the capabilities of used machine tools, the axis travels and spindle specifications are the first metrics to scrutinize. This Doosan T-4050 features an X/Y/Z axis travel of 520*400*350mm. This optimal working envelope is perfectly sized for the batch production of small to medium-sized precision components. Whether you are machining complex cavities or performing multi-sided drilling and tapping, these dimensions provide ample workspace while maintaining a compact footprint, thereby maximizing the utilization of valuable factory floor space. The most striking feature of this machine is undoubtedly its spindle. Equipped with a BT30 taper, the spindle is capable of reaching an impressive 24000rpm. In the realm of used machine tools, finding a spindle with such high-speed capabilities is a distinct advantage. A 24000rpm spindle translates to extraordinary surface finish quality and rapid material removal rates. It is particularly advantageous when machining non-ferrous metals like aluminum and copper, making it an ideal choice for manufacturing sleek, high-quality enclosures for the consumer electronics sector. Maximizing Efficiency with Siemens 828D and 21-Tool ATC The CNC controller serves as the brain of the machine, directly influencing both machining accuracy and operator convenience. This specific Doosan T-4050 is integrated with the highly acclaimed Siemens 828D CNC system. Known for its robust processing power, excellent contouring precision, and user-friendly interface, the Siemens 828D is a favorite among machinists. In our used machine tools buying guide, we consistently highlight machines with premium controllers like this, as they ensure seamless program compatibility and effortless execution of complex, high-speed toolpaths. Complementing the advanced CNC system is the machine's 21-tool Automatic Tool Changer (ATC). For a drill tap center, rapid and frequent tool changes are standard operational requirements. A 21-tool capacity provides sufficient versatility to complete intricate machining operations on complex parts without the need for manual intervention. Paired with the agile BT30 spindle mechanism, the ATC achieves incredibly fast tool-to-tool times. This dramatic reduction in non-cutting time directly boosts the overall throughput and profitability of your production line. Ideal Application Scenarios and Production Line Integration Defining the optimal application scope is a critical component of any used machine tools buying guide. Given its 520*400*350mm travel and 24000rpm high-speed spindle, the Doosan T-4050 is exceptionally well-suited for the 3C (Computer, Communication, and Consumer Electronics) industry. Tasks such as milling smartphone frames, drilling tablet enclosures, and tapping metal components for wearable devices can be executed with outstanding yield rates. The machine's high-speed dynamic response perfectly aligns with the rapid product iteration and high-volume demands typical of the 3C sector. Beyond consumer electronics, this machine is highly effective in the automotive, medical device, and aerospace industries. For automotive lightweighting components, such as aluminum valve bodies and sensor housings that require dense hole patterns and precise threads, the T-4050 delivers consistent accuracy thanks to its rigid structure and the reliable Siemens controller. Integrating this high-performance used machine tool into your facility can quickly eliminate production bottlenecks and enhance your capacity to take on diverse and demanding contracts. ROI Analysis: The Financial Edge of Used Machine Tools From a corporate finance perspective, the primary motivation for acquiring used machine tools is the unparalleled Return on Investment (ROI). Purchasing a brand-new, high-specification drill tap center requires a massive initial capital outlay and often involves long lead times. Conversely, this Doosan T-4050 (Stock No: 67058) is available immediately. It can be deployed on your shop floor to generate revenue almost instantly, and its acquisition cost is significantly lower than that of a new unit, greatly alleviating cash flow pressures. As sales experts, we emphasize the importance of equipment residual value in asset management. Doosan machine tools historically maintain excellent resale value in the secondary market. This means that if your production requirements evolve and you need to upgrade in the future, the T-4050 will still command a respectable market price. The combination of low initial investment, immediate production readiness, and strong asset retention makes this machine a financially astute choice for any growing enterprise. Used Machine Tools Buying Guide: Evaluating the T-4050 Navigating the market for used machine tools requires a discerning eye and a rigorous evaluation process. When inspecting a high-speed drill tap center like the Doosan T-4050, this used machine tools buying guide advises prioritizing the spindle's operational condition. A 24000rpm spindle must run smoothly without abnormal vibrations at top speeds, as this directly impacts the surface finish of the machined parts. Additionally, verifying the accuracy of the ball screws and linear guideways across the 520*400*350mm travel is essential to ensure precise positioning and repeatability. Furthermore, the condition of the CNC controller and the fluidity of the ATC are critical evaluation points. While the Siemens 828D is inherently reliable, it is important to confirm that all interface buttons are responsive and the display is clear. The 21-tool ATC's cam mechanism and gripper arm should execute tool changes seamlessly without hesitation. By thoroughly assessing these core components, buyers can confidently secure a machine that will deliver stable, long-term performance for their manufacturing operations. Market Trends and Resale Value of Doosan Equipment Analyzing current market dynamics, the demand for premium used drill tap centers continues to experience robust growth. As global manufacturing pivots towards higher precision and efficiency, machines equipped with 24000rpm spindles and advanced controllers like the Siemens 828D are highly sought after. The fact that this Doosan T-4050 is manufactured in South Korea adds an extra layer of quality assurance, further elevating its desirability and liquidity in the industrial equipment market. Looking ahead, as the manufacturing costs of new machinery rise and supply chain variables persist, the strategic value of high-quality used machine tools will only increase. With its solid mechanical foundation and sophisticated control technology, the Doosan T-4050 will remain a frontline asset in precision machining for years to come. For forward-thinking business leaders, acquiring this cost-effective equipment now is a strategic move to optimize production capabilities and strengthen market competitiveness. Frequently Asked Questions Q: What are the specific axis travels of this Doosan T-4050? A: The machine features an X-axis travel of 520mm, Y-axis of 400mm, and Z-axis of 350mm, making it ideal for small to medium precision parts. Q: What advantages does the 24000rpm spindle provide? A: The 24000rpm high-speed spindle significantly increases material removal rates and ensures an exceptional surface finish, especially when machining aluminum and other non-ferrous metals. Q: Which CNC controller is installed on this used machine tool? A: This equipment is outfitted with the advanced Siemens 828D CNC system, known for its powerful processing and high-precision contouring capabilities. Q: What is the tool capacity and spindle taper of this machine? A: It comes with a 21-tool Automatic Tool Changer (ATC) and utilizes a BT30 spindle taper for rapid and reliable tool changes.

Specification Details Stock Number 810981 Brand FANUC Model ROBODRILL α-T14iA Origin Japan Control System FANUC Table Size 495 x 368 mm Travel (X/Y/Z) 495 x 378 x 299 mm Spindle Taper BT30 Spindle Speed 8000 RPM ATC Capacity 14 Tools 1. Equipment Overview: The Gold Standard in Compact Machining The FANUC ROBODRILL α-T14iA is widely recognized as the industry's most reliable high-speed vertical machining center. Engineered and manufactured in Japan, the α-T14iA series embodies the perfect synergy between high-performance CNC technology and robust mechanical design. This specific unit, part of our premium used inventory, offers a rare opportunity to acquire world-class machining capability at a fraction of the cost of new equipment. Renowned for its legendary MTBF (Mean Time Between Failure), the ROBODRILL series is built to run 24/7 in demanding production environments. Whether you are dealing with high-volume electronics manufacturing or precision medical component production, the FANUC ROBODRILL α-T14iA provides the agility and precision required to stay competitive in today's fast-paced market. Its compact footprint also makes it an ideal choice for facilities where floor space is at a premium but high output is a necessity. 2. Technical Deep Dive: Performance and Precision The heart of this machine is its high-torque 8000 RPM spindle. Utilizing the popular BT30 taper, it provides the perfect balance of speed for aluminum machining and the rigidity needed for steel drilling and tapping. The 14-tool turret-style automatic tool changer (ATC) is engineered for lightning-fast tool swaps, significantly reducing non-cut time and maximizing your overall equipment effectiveness (OEE). Movement is handled by a precision-engineered drive system offering a work envelope of 495 x 378 x 299 mm. This range covers the majority of small-to-medium-sized parts found in the automotive and telecommunications sectors. The 495 x 368 mm table is designed for high dynamic loads, ensuring that even with rapid directional changes, the machine remains stable and accurate. Furthermore, the native FANUC control system ensures seamless integration, offering advanced features like AI Contour Control to maintain high feed rates without sacrificing part geometry. 3. Application Case Studies: Proven Versatility In the field, the α-T14iA has proven its worth across diverse sectors. In the 3C (Computer, Communication, Consumer Electronics) industry, it is the primary choice for machining intricate aluminum housings and internal brackets for mobile devices. Its ability to perform hundreds of small-diameter taps per hour with near-zero breakage is unmatched. In the automotive sector, customers utilize these machines for finishing small engine components, fuel system parts, and sensor housings. One client in the medical field reported that by switching to a pre-owned ROBODRILL α-T14iA for their surgical instrument line, they increased throughput by 35% compared to their older, larger machining centers, thanks to the machine's superior acceleration and deceleration rates. 4. Value Proposition: Why Invest in a Used ROBODRILL? Investing in a used FANUC ROBODRILL α-T14iA is a strategic financial move. New machine tools depreciate heavily in their first few years; by purchasing a well-maintained used unit, you avoid that initial loss while still benefiting from the core technology that makes FANUC a market leader. This allows for a much faster Return on Investment (ROI), particularly for job shops working on tight margins. Additionally, the availability of spare parts and skilled technicians for FANUC machines is second to none globally. Should you ever need to scale up or pivot your business, these machines hold their resale value exceptionally well compared to lesser-known brands. It is an asset that offers both immediate production benefits and long-term financial security. 5. Frequently Asked Questions (FAQ) Q1: Can this machine be integrated into an automated cell? Yes, the FANUC ROBODRILL α-T14iA is designed for automation. It features easy-to-interface I/O ports for robots and automatic door options, making it perfect for lights-out manufacturing. Q2: What is the maximum tool weight for the 14-tool ATC? The ATC is optimized for tools weighing up to 2kg, which is ideal for the vast majority of BT30 tooling applications used in precision drilling and milling. Q3: Is the FANUC control system user-friendly for new operators? Absolutely. FANUC is the world standard in CNC controls. Most CNC operators are already familiar with its logic, which reduces training time and minimizes operational errors. Q4: How does the 8000 RPM spindle compare to newer 10k or 24k models? While specialized for high-speed tapping, the 8000 RPM spindle offers higher low-end torque than many ultra-high-speed spindles, making it more versatile for varied materials including cast iron and stainless steel.