Used FANUC α-D21MiB PLUS Drill Tap Center

Many machining factories struggle with tool vibration, unstable workpiece dimensions, low productivity and frequent machine failures during mass production of precision parts. The KIA VX380Ti drilling and tapping center perfectly solves these common industry pain points and has become a mainstream model for small and medium-sized precision processing workshops. The machine adopts an integrated thick high-rigidity cast iron bed, which greatly enhances overall stability and shock resistance. During high-speed drilling, tapping and milling processes, it effectively suppresses cutting vibration and avoids surface vibration lines. It ensures highly consistent size accuracy for mass-produced aluminum parts, hardware accessories and miniature mechanical components, greatly reducing defective products and production costs. Equipped with a reliable Mitsubishi CNC system, the machine supports intelligent precision compensation and servo overload protection. It runs stably for long-term two-shift and three-shift continuous production, with extremely low failure rates and almost no unexpected shutdowns. The high-performance BT30 high-speed spindle features fast acceleration and deceleration and stable rigid tapping performance, effectively preventing tap breakage, thread damage and tool burning during high-frequency tapping work. Matched with a high-precision disc tool magazine, the machine realizes fast and accurate automatic tool change. It rarely causes tool jamming, tool dropping or positioning errors. It greatly shortens auxiliary processing time and significantly improves overall workshop production efficiency. Featuring a compact body design, the machine saves factory space. The inclined bed structure achieves smooth chip removal and avoids debris accumulation. The circulating cooling system works stably for a long time to ensure excellent workpiece surface finish. The whole machine is easy to operate and simple to maintain. New operators can master basic operation and programming quickly, lowering enterprise training costs. Widely applicable for 3C electronic parts, precision hardware, medical device accessories and small mold processing, the KIA VX380Ti balances high precision, high efficiency and ultra-high cost performance, helping processing factories stabilize quality, increase output and accelerate capital return. FAQ 1. Is the KIA VX380Ti suitable for long-term mass production?Yes. With high rigid body and wear-resistant core parts, it supports 24-hour uninterrupted mass production with stable precision and low attenuation. 2. Does the machine easily break taps during tapping?No. It features synchronous spindle and Z-axis control, stable rigid tapping and good cooling effect, which greatly reduces tap breakage. 3. Is it friendly for new operators?Absolutely. The Mitsubishi system has a simple interface and standard machining cycles, making it easy to learn and operate. 4. Is daily maintenance complicated?No. It has automatic lubrication, smooth chip removal and a stable cooling system, requiring only simple daily inspection and cleaning.

Yes. This used Brother S700Z2N tapping center is listed under stock number 812566 in China, with the 2022 build year and key working specifications already provided, so buyers can move straight to inspection planning instead of first requesting basic machine details. For buyers comparing compact, high-speed machining options, it is ready for serious evaluation as an in-stock machine. What listing details show the Brother S700Z2N is inspection-ready? A machine is easier to inspect when the listing already covers the first questions a buyer will ask. In this case, the main commercial and technical details are available: brand, model, stock number, year, origin, location, and core configuration. This machine is a Brother S700Z2N made in Japan, built in 2022, and located in China under stock number 812566. That gives buyers enough detail to move from online review to arranging an on-site inspection or video inspection. Brand:  Brother Model:  S700Z2N Machine Type:  Tapping Center Stock Number:  812566 Year:  2022 Origin:  Japan Travel:  700 x 400 x 300 mm Table Size:  800 x 400 mm Spindle Speed:  10000 rpm Spindle Taper:  BT30 Tool Capacity:  14 tools Rapid Traverse:  50 x 50 x 56 m/min Machine Weight:  2450 kg These details matter because inspection readiness is not only about whether a machine is in stock. It also depends on whether the seller has provided enough information for the buyer to judge suitability, prepare technical questions, and decide whether the machine is worth a site visit, remote run-off, or formal negotiation. How does the S700Z2N fit real production use before you commit? The Brother S700Z2N is the type of compact vertical tapping center buyers often shortlist when they need one machine that can cover a range of jobs rather than a very narrow single-part application. With 700 x 400 x 300 mm travel, an 800 x 400 mm table, a BT30 spindle, 10,000 rpm spindle speed, and a 14-tool magazine, it suits small to medium precision work where fast cycle times and simple tool changes matter more than heavy cutting on large parts. That makes it a practical option for mixed production environments such as automotive brackets and housings, aerospace aluminum components, mold electrodes and plate work, medical device parts, and electronics fixtures or precision plates. The appeal is not just general marketing language; it comes from the machine's balanced size, compact footprint, and speed-oriented configuration. Buyers looking for a versatile machine can assess it as a flexible shop-floor asset rather than only a dedicated tapping unit. The rapid traverse rates of 50 x 50 x 56 m/min also indicate a machine set up for efficient movement between operations, which is important when cycle time affects the buying decision. For buyers, that means the inspection should focus on whether the machine still performs consistently in the short-run or repeat-batch work common across multiple industries. What should a buyer verify during inspection or negotiation? Since the listing already confirms the machine identity and base specifications, the next step is not asking broad introductory questions. It is verifying actual performance against your own parts and process requirements. For this Brother S700Z2N, the most useful inspection points tie directly to the published specifications. Confirm that the full three-axis travel is available and usable for your actual work envelope. Check whether the 800 x 400 mm table matches your fixture size and part loading method. Run the spindle through its speed range up to 10,000 rpm and listen for unusual vibration or noise. Inspect the BT30 tool interface condition and test the 14-tool magazine for stable indexing and tool change action. Review machine movement at the listed rapid traverse rates to judge response, smoothness, and repeatability. Use the machine dimensions and 2450 kg weight to confirm delivery access, rigging, and installation planning. From a negotiation standpoint, this gives buyers a stronger position than starting from an incomplete listing. Because the key specifications and location are already stated, discussions can stay focused on inspection results, process suitability, and logistics. That usually supports faster decision-making, especially for buyers who need a compact machining solution with flexibility across industries. Related Questions Is the Used Brother S700Z2N available for inspection? Yes. It is listed as stock number 812566 in China, with the year, origin, and core operating specifications already provided for buyer review. Is this Brother S700Z2N currently identifiable as in-stock equipment? Yes. The stock number and physical location show that it is being offered as a specific machine, not a general model listing. Is the Brother S700Z2N suitable for different industries? Yes. Its BT30 spindle, compact table, and fast traverse rates make it relevant for automotive, aerospace, mold making, medical device, and electronics work. What delivery factors should be checked before purchase? Confirm transport and installation planning based on the listed machine size of 2497 x 2050 x 2223 mm and machine weight of 2450 kg.

The Doosan T4005 drill tap center has become a well-known choice among contract manufacturers and component producers who need a compact, high-productivity CNC machine. This 2023 unit,  listed under stock number 812394, provides 520 mm X-axis travel, a 12,000 rpm BT30 spindle, and a 21-tool magazine. It is a production-ready solution for shops machining small to medium‑sized precision parts across automotive, electronics, medical device, aerospace, and mold making sectors. Because the machine is in stock and available for immediate inspection, it avoids the long lead times typical of new equipment orders — a critical advantage for production planners looking to expand capacity now. Stock Status and buying value The current availability of this Doosan T4005 presents a rare opportunity for procurement teams. As a 2023 machine with limited use, it is in near-new condition — but without the typical 8‑12 week factory order lead time. The unit is located at a partner facility, where an inspection can be arranged at short notice. Stock number 812394 provides full traceability in our inventory system. For factory owners and production managers evaluating a near-term capacity expansion, immediate availability means shorter project timelines and a faster return on investment. From a cost perspective, buying a used 2023 Doosan T4005 drill tap center typically involves considerably lower capital expenditure than ordering a new equivalent, while still offering the latest-generation Mitsubishi M80 control and the robust Doosan build quality. This combination of nearly new performance and immediate availability makes the unit a practical choice for both expanding shops and replacement buyers. ✓ In Stock — Available Now Key Specifications and Production Readiness Rather than simply listing figures, it's useful to understand how each specification impacts daily production flow, tooling compatibility, and part quality. Here is a breakdown of the key data and what it means on your shop floor. CNC CONTROL: Mitsubishi M80 X/Y/Z TRAVEL: 520 × 400 × 350 mm TABLE SIZE: 650 × 400 mm SPINDLE SPEED: 12,000 rpm SPINDLE TAPER: BT30 TOOL MAGAZINE: 21 stations Control system. The Mitsubishi M80 is known for fast processing and an operator-friendly interface. Maintenance technicians and programmers can integrate the machine quickly into an existing production line with minimal retraining — a practical advantage when adding a used machine mid-project. Work envelope. With travels of 520 mm in X, 400 mm in Y, and 350 mm in Z, the T4005 accommodates a broad range of workpiece sizes common in automotive sensor housings, electronic connector bodies, small medical implants, and general industrial components. The 650 × 400 mm table provides ample space for dedicated fixture plates or multiple vise setups, supporting both single-part runs and small-batch production. Spindle and tooling. The 12,000 rpm BT30 spindle is key to the machine's speed. BT30 tooling is lightweight and accelerates quickly, which is ideal for high-cycle drilling and tapping operations in aluminum, brass, and mild steel. This spindle taper also helps keep tooling costs under control — BT30 holders are widely available and less expensive than larger taper equivalents. The 21‑tool magazine allows a single setup to handle drilling, tapping, light milling, and chamfering unattended, improving both throughput and consistency. Production readiness. Because the machine is already located in China with these specifications, it can go from inspection to shipment to installation in days rather than months. For a buyer who has existing orders waiting for machine capacity, that speed is just as important as any technical spec. Frequently Asked Questions 1. What is the current stock status of this Doosan T4005 drill tap center? The machine is in stock at our facility under inventory number 812394. It is a 2023 unit and available for immediate inspection and purchase. As this is a single-unit item, availability can change quickly — we recommend confirming stock status when you inquire. 2. Can I inspect the used Doosan T4005 before making a purchase decision? Yes, inspection is encouraged. The machine is accessible at our facility, and we can schedule an appointment for you or your technical team to carry out spindle checks, axis tests, tool changer cycling, and control verification. You are welcome to bring your own test equipment and sample programs. 3. What kinds of parts are best suited to the Doosan T4005? The T4005 is ideal for small to medium‑sized precision parts requiring multiple drilled and tapped holes, light milling, and chamfering. Typical examples include automotive sensor housings, electronic connectors, medical bone plates, mold ejector plates, and aerospace aluminum fittings. Its 520 × 400 × 350 mm work zone and BT30 spindle make it a strong fit for high‑mix, medium‑volume production across many industries. 4. How well does the 12000 rpm BT30 spindle perform in daily production? The 12,000 rpm BT30 spindle is built for rapid drilling and tapping cycles, especially in aluminum, brass, and free-machining steels. BT30 toolholders are lightweight and accelerate quickly, reducing cycle time on small tools. For shops that run many holes and threads, this spindle configuration delivers both speed and consistent accuracy. 5. What are the most important things to check when evaluating this used drill tap center? Focus on spindle taper condition, axis backlash, tool changer reliability, control functionality (Mitsubishi M80), and coolant system performance. A 2023 machine with limited use should pass these checks without issue, but verifying them in person gives you confidence that the machine can run production parts immediately. 6. How soon can this machine be shipped after an inquiry? Once the purchase is confirmed and logistics are arranged, the Doosan T4005 can be prepared for shipment quickly — typically in a matter of days, not weeks. Because the machine is already located in China, a major manufacturing and logistics hub, both domestic and international freight arrangements are straightforward. We will provide an exact timeline based on your destination and shipping method.

This 2014 Doosan TC400 Drilling and Tapping Center is in-stock and available for immediate inspection at our facility. Engineered for high-speed, high-precision production, this machine features a 520 x 400 x 350 mm work envelope and a reliable 10,000 rpm BT30 spindle. Equipped with the industry-standard Fanuc Oi-MD control, it provides a robust platform for manufacturers looking to optimize cycle times while maintaining consistent part quality. Whether you are scaling up production for small-to-medium components or looking to maximize floor space with a versatile workhorse, this unit is ready for evaluation. Stock Status and buying value This Doosan TC400 (Stock No: 811948) is physically located in our warehouse, eliminating lead times associated with factory-to-port shipping or manufacturing delays. In the current market, acquiring a proven platform like the TC400 allows production managers to deploy capacity immediately. The value of this unit lies in its combination of the reliable Fanuc Oi-MD interface—familiar to operators worldwide—and the compact, high-speed architecture characteristic of Doosan drilling/tapping centers. This machine is an ideal solution for shops aiming to reduce cycle times on smaller parts. Unlike heavy-duty milling centers that may be overkill for high-volume, light-duty work, the TC400 is optimized for speed. Purchasing this used unit provides a cost-effective route to increasing throughput without the capital expenditure of a new machine. Key Specifications and Production Readiness Reviewing the technical parameters is essential to confirming this machine fits your current tooling and part requirements. The TC400 is configured for agility and rapid production. Model: Doosan TC400 Year: 2014 CNC System: Fanuc Oi-MD X/Y/Z Travel: 520 × 400 × 350 mm Spindle Taper: BT30 Spindle Speed: 10,000 rpm Tool Capacity: 14 Stations The 10,000 rpm BT30 spindle is the core of this machine's performance, specifically designed for light milling, drilling, and tapping operations. The 14-station tool changer ensures that complex parts with multiple hole patterns or varying drill sizes can be processed in a single setup. The 520mm X-axis travel provides sufficient room for standard fixture plates, making it a highly adaptable machine for various production environments. Ideal Applications The Doosan TC400 is a versatile performer, excelling in environments where part variety and throughput requirements are critical. It is well-suited for several key industries: Electronics Manufacturing: Ideal for machining small aluminum or plastic casings, heat sinks, and connectors requiring high-speed drilling and tapping. Medical Device Production: Suitable for small-batch or high-volume production of surgical instrument components and small housings requiring precision finishes. Automotive Tier 2/3 Suppliers: Perfect for small brackets, fasteners, and interior components that demand rapid cycle times. Mold & Die Shops: Excellent as a secondary machine for electrode production or small cavity/core detailing, freeing up larger machines for heavy-duty work. If your production floor is currently bottlenecked by small-part drilling or tapping, or if you need to dedicate a machine to a specific high-volume product line, the TC400 is a logical, high-ROI addition. Why This Machine is worth considering In the used machinery market, finding a 2014 Doosan TC400 in good condition is a prime opportunity to acquire a proven, reliable asset. The Doosan brand is widely recognized for rigid construction and longevity, even in high-speed applications. This machine is not just a purchase; it is a tool to stabilize and increase your production capacity. Because it is currently in stock, we can facilitate a quick inspection and shipment process. For production managers looking to optimize their floor layout, the TC400 offers a compact footprint without sacrificing the travel distances required for most small-to-medium part machining. Frequently Asked Questions Q: Is this machine available for inspection in? A: Yes, this machine is currently in our warehouse and is available for inspection. Please contact us to schedule a time to see it under power. Q: What type of parts is the TC400 best suited for? A: The TC400 is a drilling and tapping center, making it ideal for small-to-medium parts, especially those requiring high-speed drilling, tapping, and light milling. It is highly effective for electronics components, medical devices, and small automotive parts. Q: Does the Fanuc Oi-MD control support modern CAD/CAM software? A: Yes, the Fanuc Oi-MD is a standard, widely supported control system that is fully compatible with modern CAD/CAM software workflows, ensuring easy integration into your existing programming environment. Q: How does the BT30 spindle impact my production? A: The BT30 spindle is designed for high-speed, light-duty operations. It allows for faster tool changes and higher spindle speeds compared to larger BT40 machines, significantly reducing cycle times for drilling and tapping tasks.