What makes and models of slow-wire equipment are recommended?
Here are some recommended brands and models of slow-wire equipment:
### Fanuc
- **α-C400iB**: Table travel is 400mm×300mm, Z-axis travel is 255mm, workpiece size can be processed 730mm×630mm×250mm, using wire diameter 0.1-0.3mm, suitable for processing small and medium-sized precision parts, the equipment has high precision, automatic threading function is powerful, it can complete the automatic threading of 0.10 fine wire in 10 seconds, and it has good processing stability and can effectively guarantee the processing precision and surface quality. The machine has high precision and powerful automatic threading function, which can finish 0.10 fine wire threading automatically within 10 seconds.
- **α-C600iB**: Stroke 600mm x 400mm, Z-axis stroke 310mm, workpiece size 1050mm x 820mm x 300mm, load capacity up to 1000kg, suitable for medium-sized molds and parts machining, high cutting efficiency to meet the needs of mass production, and its high-precision positioning and repetitive positioning system, which ensures the consistency of the machining dimensions. .
- **α-C800iB**: Table travel 800mm×600mm, Z-axis travel 310mm, workpiece size up to 1250mm×1020mm×300mm, mainly used for large molds and large parts machining, with strong cutting capacity and stability, can adapt to complex shapes and high-precision requirements of the machining task.
### West
- **M35HP**: the movement of each axis is 350mm×300mm×230mm, the maximum workpiece size is 700mm×630mm×220mm, the maximum workpiece weight is 350kg, the diameter of the wire electrode is 0.07-0.3mm, it is suitable for small precision parts machining, it has the characteristics of high precision and high efficiency, and its pitch machining accuracy can reach ±1um, it can It has high precision and high efficiency, and its pitch machining precision can reach ±1um, which can meet the production of parts with extremely high requirements for machining precision.
- **M50B**: table stroke 500mm x 350mm, maximum cutting thickness 300mm, surface roughness 0.2um, electrode wire diameter range 0.1-0.3mm, maximum load-bearing capacity of 800Kg, taper ± 10 ° / plate thickness of 300mm, can be processed for larger sizes and weights of the parts, while maintaining a high degree of machining accuracy and surface quality, and can adapt to the needs of diversified precision machining. It can meet the diversified demands of precision machining.
### Sardick
- **AQ325L**: with high cutting accuracy and surface quality, it is suitable for processing small and medium-sized precision molds and parts, with good stability and long time stable operation, which can effectively reduce the production interruption caused by equipment failure and improve the production efficiency.
- **AQ400LS**: excellent processing accuracy and stability, can achieve high precision cutting processing, suitable for the processing of parts with strict requirements for dimensional accuracy and surface roughness, such as precision molds, aerospace parts and so on.
- **ALN400**: balanced performance in cutting efficiency and precision, can meet the general demand for precision parts processing, has a good cost performance, suitable for small and medium-sized enterprises and processing workshop selection.
### Charmilles
- **CUT P 350 Pro**: The standard configuration of wire guide nozzle diameter is 0.10-0.30mm, the maximum cutting taper is 30°/100mm, the maximum moving speed of X and Y axes is 3m/min, and the threadable height is 250mm, which is suitable for machining small precision parts with high precision and high efficiency, and its advanced electronic control system can provide higher machining precision and stability.
- **CUT P 550 Pro**: similar performance to CUT P 350 Pro, but the processing size range is larger, can meet the processing needs of medium-sized parts, with higher cutting accuracy and surface quality, can effectively improve processing efficiency and product quality.
- **CUT P 800 Pro**: can process parts of larger sizes, the maximum cutting taper and threading height and other parameters are further improved, suitable for large molds and parts processing, its stable cutting performance and high-precision machining capabilities to ensure that the processing of large parts precision and quality.
### Mitsubishi
- **FA20S**: suitable for processing small precision parts, with high processing accuracy and stability, high success rate of automatic threading, easy to operate, can effectively improve processing efficiency and reduce labor costs, suitable for small and medium-sized enterprises and processing workshops.
- **MV1200S**: Adopting sleeve linear motor drive and Opt Drive System, it improves machining precision and response speed, realizes high speed machining of micro-fine surfaces, greatly improves the success rate of automatic threading of electrode wires, and extends the corresponding range of bending rate from 3% to 10%, and greatly improves the success rate of threading of broken wires of thick plates, which is suitable for machining of parts with high requirements for machining precision and surface quality. This makes the machine suitable for processing parts with high demands for machining accuracy and surface quality.
- **DWC-200HA**: With excellent performance in precision and efficiency, it can meet the needs of medium and large-sized molds and parts processing, and its advanced drive system and control system can ensure the stability and precision of the processing process and improve productivity.
### Precision Presentation
- **V50 water jet type**: large workpiece size 950mm x 650mm x 255mm, XY-axis travel 500mm x 300mm, UV-axis travel 120mm x 120mm, Z-axis travel 260mm, using wire diameter 0.15-0.3mm, adopting stabilized arc-inducing voltage circuit and electrolysis-free discharging power supply system, which can maintain cutting stability and increase speed, and at the same time The RTS discharge circuit can effectively monitor the discharge state, reduce the phenomenon of broken wires, and improve the processing efficiency and precision.
More Articles
-
Boring Machine Bore Diameter: How to Choose the Right Machining RangeChoosing the correct boring machine bore diameter starts with the workpiece, not the machine catalogue. The finished bore, existing hole condition, access length and material determine whether a machine can complete the job efficiently. A quoted maximum diameter alone does not show whether the machine can enter the smallest hole or maintain a practical setup across the full machining range. Start with the workpiece and the finished bore Record the smallest and largest bore diameters that the machine must produce. Also note whether the hole is a through bore, blind bore, stepped bore or aligned set of holes. Measure the available access around the workpiece and the distance from the mounting position to the bore centerline. The minimum bore diameter must allow the boring bar, cutting tool and any required support components to enter the hole with safe clearance. The maximum bore diameter must include the actual cutting diameter required after considering the existing hole, machining allowance and finishing pass. If a job involves several bore sizes, use the complete range rather than selecting the machine from the largest size only. Use the real boring machine working range Workpiece condition Range to verify Why it matters Small existing hole Minimum tool and bar entry diameter Determines whether the tool can reach the bore without interference. Large repair bore Maximum finished cutting diameter Confirms that the machine can remove the required material and finish the bore. Deep or offset bore Boring bar length and support position Controls reach, clearance and the usable portion of the diameter range. Stepped or multiple bores Complete diameter sequence Shows whether one configuration can cover the job without repeated changes. The usable boring machine working range is narrower than a headline range when the workpiece requires a long reach, large material removal or restricted access. Confirm the machine's operating diameter at the required boring bar length, because a configuration suitable for a short bore may not provide the same practical capability at greater depth. Match boring bar length, tooling and material Boring bar length should be based on the distance from the mounting point to the deepest cutting location. Select the shortest bar that reaches the required position while preserving clearance. Excessive length can reduce rigidity and limit practical cutting conditions, especially in hard steel or interrupted repair surfaces. Tool selection also affects the usable bore range. Small diameters may require compact cutters and suitable insert clearance; larger diameters may require a different bar, cutter arrangement or support method. Cast iron, carbon steel, alloy steel and other materials can require different cutting tools and machining approaches. These choices should be confirmed together with the diameter and reach rather than treated as separate specifications. Submit actual dimensions for configuration confirmation Before ordering, provide the supplier with the smallest and largest finished bore, existing bore sizes, bore depth, workpiece material, machining allowance, access restrictions and required bore locations. A drawing or clear dimensional sketch allows the supplier to confirm the machine range, boring bar length and tooling configuration for the actual repair or production task. FAQ Is the maximum bore diameter enough for machine selection? No. The minimum bore, required reach, cutting allowance and tool clearance are equally important. A machine may reach the largest diameter while being unsuitable for the smallest hole or deepest section. How does boring bar length affect the machining range? A longer bar extends reach but can change the practical working range because access, rigidity and tool clearance become more restrictive. Confirm the diameter range at the required reach. What information should be sent for a bore range check? Send the real workpiece drawing or dimensions, finished bore range, existing hole sizes, bore depth, material, allowance and access conditions. These details support configuration confirmation before purchase.
-
Boring Machine Applications in Construction Equipment RepairWhen a pin joint develops play, replacing the pin alone may not solve the problem. Wear can leave the housing bore oval, tapered or out of alignment. A boring machine for construction equipment repair restores the bore so the joint can be fitted with a correctly sized pin or bush. This work is often performed on the machine in the field when removing a large component would add substantial downtime. Where bore wear occurs on construction equipment Repeated articulation, impact loading, inadequate lubrication and contamination can wear the bores that support pins and bushes. The repair target is the damaged joint bore, not simply the visible pin. Before machining, the technician needs to identify the joint layout, access, material condition and the relationship between connected bores. Equipment Typical bore Repair purpose Excavator Boom, arm and bucket pin bores Restore pin fit and joint alignment Loader Lift-arm and bucket pivot bores Correct wear at heavily cycled pivots Backhoe Dipstick, boom and stabilizer pin bores Re-establish fit across linkage joints Crane Boom and linkage pivot bores Address wear at structural articulation points Hydraulic equipment Cylinder-end and mounting pin bores Restore the connection between cylinder and structure How boring repair addresses the damage Construction equipment boring repair typically starts with inspection and measurement. The repair team checks bore diameter, roundness, wear pattern and alignment with related bores. If the housing is suitable for repair, a portable line boring setup machines the damaged bore to a controlled, consistent diameter. Depending on the repair plan, the bore may then receive a bush, or be finished to suit the specified pin or bearing arrangement. Where two or more bores form one pivot line, their alignment matters as much as the individual diameters. Machining them in a common setup can help restore the intended axis. The required dimensions and fit should come from the equipment specification or an agreed repair drawing; they should not be assumed from the pin size alone. Field conditions shape the repair plan Access, nearby structures, available setup space and the condition of the surrounding material affect whether on-site boring is practical. Cracks, severe distortion, damaged welds or a bore near a highly loaded structural area may require additional inspection or a different repair sequence. The machine must also be isolated and securely supported before work begins, following site and equipment safety procedures. For a field assessment, document the machine and joint location, report the symptoms, and provide measurements or photographs where available. Confirm whether connected bores need to be machined on the same axis, whether a bush will be installed, and what final fit is required. These details help establish a realistic repair scope before equipment is mobilized. Frequently asked questions Which excavator parts commonly need bore repair? Boom, arm and bucket pin joints are common locations, as are other pivot connections showing looseness or uneven wear. Inspection determines whether the bore, pin, bush or several parts need attention. Can loader pivot bores be repaired on site? Often, but feasibility depends on access, setup conditions, damage severity and the required machining sequence. A site assessment can establish whether portable boring is appropriate. Does every worn bore need a new bush? No. The repair method depends on the equipment design, bore condition and specified fit. Confirm the intended finished dimensions and component arrangement before machining.
-
Boring Machine Cost Guide: What Affects the Price of Industrial Equipment?Two boring machines intended for similar repair work canreceive very different quotations because the price reflects more than the machine’s basic size. Machine type, working range, drive power, accuracy requirements, tooling and included automation all affect the final configuration. To compare a boring machine price accurately, compare the scope of supply and the job requirements, not just the headline figure. What drives the quotation? Price factor Why it affects cost Details to specify Machine type and setup Portable systems and larger stationary equipment have different structures and intended applications. Equipment type, work location and setup constraints Bore size and machining range Required diameter, bar length and travel determine the working envelope and compatible components. Minimum and maximum bore diameter, machining length and access Power and duty Drive requirements depend on the material, cutting conditions and expected workload. Workpiece material, typical jobs and operating frequency Accuracy and tooling Accuracy requirements and the tooling package influence component selection and what must be supplied. Required results, cutters, mounts and other tooling needs Automation and customization Controls, optional functions and non-standard configurations add scope to the build. Required automation, special interfaces and quantity Configuration matters more than a bare price A lower-priced machine may have a narrower machining range, fewer included tools or less automation. A higher quotation may include a broader configuration or options that are unnecessary for a particular job. Neither price alone establishes suitability. For a portable boring machine price comparison, check that the quoted setup can reach the bore, fit the available work area and perform the required operation. Accuracy should also be described in terms of the work to be done. Share the required result and relevant workpiece details so the supplier can quote a configuration against the application. Avoid comparing quotations that assume different tooling, accessories, automation or customization. Prepare information for a useful quote For a meaningful boring machine cost estimate, provide the bore diameter range, machining length, material, workpiece or equipment details, site access constraints and expected operating frequency. List required tooling, accuracy expectations, automation and any special mounting or interface requirements. Include the purchase quantity and identify which accessories should be included. Ask suppliers to show the proposed configuration and included items in the quotation. This makes differences easier to trace and helps prevent a low initial figure from omitting components needed for the intended work. Submit the same job information to each supplier when comparing offers. Frequently asked questions Why is one boring machine much cheaper than another? The machines may differ in type, working range, power, included tooling, accuracy-related configuration, automation or customization. Compare the quoted scope against the same application before judging the difference. What information is needed to quote a boring machine? Provide the required bore diameters and machining length, material, workpiece and site constraints, expected use, accuracy needs, tooling and automation requirements, customization details and order quantity. These details help suppliers quote a configuration suited to the job.
-
Used Automatic Lathe Machine for Sale WorldwideUsed automatic lathe machines provide a practical route to high-volume turning capacity without the lead time and capital cost of new equipment. For worldwide buyers, condition verification and supplier capability determine whether a low purchase price becomes a reliable production asset. Used Automatic Lathe Machine for Sale Worldwide What Buyers Should Assess A well-maintained cam-operated or CNC automatic lathe can retain stable repeatability for years when spindle bearings, guideways, collets, lubrication, and control components are within specification. Typical remaining service life is 5-12 years for a properly rebuilt machine, but heavily worn feed systems, obsolete controls, and unavailable parts create material selection risk. Machine type Typical work Used price range Main risk Cam automatic lathe Small pins, screws, fittings US$3,000-15,000 Cam and clutch wear Single-spindle CNC lathe Precision shafts, bushings US$8,000-35,000 Control and servo age Swiss-type CNC lathe Medical and electronics parts US$18,000-80,000 Guide bushing accuracy Inspection Before Shipment Checkpoint Acceptance focus Spindle Measure runout, noise, heat, and speed stability Axes and slides Check backlash, repeatability, way damage, and lubrication Tooling system Confirm collet, turret, feeder, and change-part availability Trial cutting Verify diameter, surface finish, cycle time, and scrap rate Electrical system Test alarms, drives, safety devices, and documentation Request a cold-start video, spindle runout report, sample-part test, machine serial number, and packing photographs. Accuracy claims should be supported by measured results, not appearance or repainting. China Supplier Value Established China-based suppliers combine broad used-machine sourcing with competitive refurbishment costs and export packing experience. Prefer suppliers able to provide inspection records, relevant quality certification, export documents, remote commissioning support, and stocked wear parts such as collets, belts, seals, sensors, relays, and hydraulic components. Cost item Direct as-is purchase Inspected Chinese supplier Initial price Lower Moderate Condition evidence Often limited Test data and video Export support Buyer-managed Crating and documentation After-sales response Uncertain Parts and technical support FAQ Can a used automatic lathe hold tight tolerances? Yes, after measured verification, alignment, and trial cutting; condition matters more than machine age. What accuracy should be checked? Check spindle runout, axis backlash, repeat positioning, workpiece diameter variation, and surface finish. Are old controls a concern? Yes. Confirm backup availability, drive condition, electrical drawings, and an upgrade path before purchase. Should buyers choose rebuilt equipment? Choose rebuilding when it includes documented replacement of wear components and a witnessed test, not cosmetic painting alone. Which spare parts should be ordered initially? Order consumable seals, belts, collets, sensors, contactors, filters, and model-specific tooling where available. Can a Chinese supplier arrange worldwide delivery? Experienced exporters can arrange seaworthy packing, shipping documents, and remote installation guidance. Choose a reliable Chinese supplier that can prove machine condition, support export delivery, and quote the right configuration for your current parts. Request a current quotation with inspection data before ordering.
