Used Goodway GCL-2L CNC Lathe
Author：JINYI Date：2026-06-25
A pre-owned Goodway GCL-2L CNC lathe (2019) with FANUC 0i-TD control is now available on the used machinery market and open for immediate inspection. Delivering 400 mm swing over bed, 230 mm maximum turning diameter, and 600 mm turning length, this horizontal turning center is built for medium-duty production across automotive, aerospace, medical device, and general engineering shops. Its 15 kW spindle motor, 4,500 rpm top speed, and 52 mm bar capacity make it a versatile single-machine solution for shafts, bushings, connectors, and mold components. Located in China and ready for powered evaluation, this unit gives buyers a fast path to near-current capability without new-machine lead times.
Market Availability & Inspection Readiness
Stock number 812455 identifies a single 2019-built Goodway GCL-2L that has recently come onto the market. The machine is located in China and can be inspected under power by appointment. Because this is a physical, on-hand unit — not a consignment or remote listing — procurement managers can assess actual condition, spindle runout, and control response before committing. The pairing of a Taiwan-built machine with a widely supported FANUC control makes this lathe a practical choice for factories looking to add capacity without waiting on factory-order delivery. The value lies in its balanced work envelope: large enough for typical job-shop parts, yet compact enough for cellular layouts.
Compared with ordering a new equivalent, acquiring this used GCL-2L can significantly shorten the commissioning timeline, assuming the inspection confirms mechanical and electrical integrity. The machine also comes with standard tooling readiness — the A2-6 spindle nose ensures broad chuck and collet compatibility.
Key Specifications & What They Mean on the Shop Floor
MAX SWING OVER BED: 400 mm
MAX TURNING DIAMETER: 230 mm
MAX TURNING LENGTH: 600 mm
SPINDLE BORE: 52 mm
SPINDLE MOTOR: 15 kW
SPINDLE SPEED: 4500 rpm
SPINDLE NOSE: A2-6
CNC CONTROL: FANUC 0i-TD
Swing and turning diameter: The 400 mm swing accommodates raw stock up to that diameter, while the 230 mm maximum turning diameter determines the finished part envelope. This combination works well for medium-batch flanges, pulleys, and bearing housings. A turning length of 600 mm covers typical shaft work found in hydraulic cylinders, gearbox shafts, and spindle components, without demanding an oversized machine footprint.
Spindle motor (15 kW) and 4,500 rpm: These figures deliver enough torque for roughing steel and stainless steel, while the high rpm range supports fine finishing on aluminum or brass parts. Shops that require both heavy cuts and precise surface finishes will benefit from this speed-power balance. A 52 mm spindle bore enables bar feeding of diameters up to 52 mm, boosting unattended productivity when paired with a bar loader — an important detail for high-mix, medium-volume operations.
The A2-6 spindle nose is standard in its class, meaning chucks, collet chucks, and face drivers are readily sourced. FANUC 0i-TD control supports standard G-code and canned cycles, so existing part programs or CAM posts can be transferred with minimal editing.
which operations should consider this machine now
The Goodway GCL-2L suits a broad range of production environments precisely because its specifications are neither too small nor overly specialized. Below are the typical profiles that gain immediate value from this used CNC lathe:
- Automotive parts suppliers: producing wheel hubs, brake pistons, alternator shafts, and small transmission components within the 230 mm turning diameter.
- Aerospace subcontractors: machining hydraulic fittings, bushings, and small structural parts where FANUC control reliability and consistent turn-mill prep work matter.
- Mold & die shops: turning ejector pins, guide pillars, and core inserts up to 600 mm long, often from tool steels that capitalize on the spindle torque.
- Medical device manufacturers: crafting orthopedic implants, bone screws, and surgical instrument bodies from stainless or titanium, taking advantage of high-rpm finishing passes.
- Electronics & connector producers: small, precision parts such as sensor housings and connector shells, supported by the 4,500 rpm capability and crisp FANUC interpolation.
- General job shops: the "one machine, many applications" flexibility reduces the need for multiple lathe sizes when handling mixed batches of prototypes and repeat orders.
Frequently Asked Questions
Is the Goodway GCL-2L CNC lathe still in stock and available?
Yes, this 2019 unit is physically in stock and available for inspection. It has not been sold and can be reserved for evaluation.
Can I visit and inspect the machine before purchasing?
Absolutely. An in-person, powered inspection is encouraged. You can verify spindle runout, control operation, and axis movement at our Dongguan location.
What kind of parts can this used CNC lathe realistically produce?
It handles parts up to 230 mm diameter and 600 mm long — typical shafts, flanges, bushings, connectors, and medical/mold components in steel, stainless, aluminum, and engineering plastics.
Is the FANUC 0i-TD control compatible with our existing programs?
Generally yes. The 0i-TD uses standard G-code and ISO programming, so most CAM postprocessors and existing FANUC programs can be adapted with minor modifications.
How quickly can the machine be put into production after purchase?
Because it is a complete, functional used lathe, commissioning mainly involves transport, leveling, and connection to power. Depending on your facility readiness, it can begin cutting parts shortly after relocation.
What makes this GCL-2L more versatile than other used CNC lathes?
Its combination of 4,500 rpm top speed, 15 kW power, 52 mm bore, and 600 mm turning length allows it to shift between small-lot precision work and heavier automotive jobs — one machine covering multiple production styles.
More Articles
-
Best Automatic Lathe Machines for Metal ProcessingBest automatic lathe machines for metal processing depend on part geometry, batch size, tolerance, and the buyer’s ability to support the control system. A well-inspected used automatic lathe can deliver strong repeatability and a lower unit cost than a new machine. Choosing an Automatic Lathe Machine type Best fit Typical capability Main risk Cam automatic lathe Very high-volume simple parts Fast fixed-cycle turning Limited changeover flexibility CNC turning center Mixed batches and complex profiles Turning, drilling, threading Control and turret repair cost Swiss-type CNC lathe Long, small-diameter precision parts Guide bushing and live tools Guide-bushing wear affects accuracy For shafts, fittings, fasteners, bushings, and hydraulic components, prioritize bar capacity, spindle bore, tool stations, chip evacuation, and automation compatibility. Swiss-type machines are usually the strongest choice for slender parts where deflection control matters. Accuracy, Life, and Inspection A maintained CNC automatic lathe commonly retains useful production accuracy for many years, but calendar age is less important than spindle hours, crash history, lubrication quality, and preventive service records. Check actual test cuts rather than relying only on nameplate specifications. Inspection point Acceptance focus Selection impact Spindle Noise, heat, vibration, runout Surface finish and bearing cost Axes and ballscrews Backlash, repeat positioning, smooth travel Diameter and length consistency Turret and tools Indexing accuracy, clamp force, live-tool noise Cycle reliability Hydraulics and lubrication Leaks, pressure stability, oil delivery Service life and downtime Control system Alarms, backup, drives, screen condition Parts availability and recovery risk Common faults include spindle-bearing noise, turret misindexing, axis backlash, hydraulic leakage, bar-feeder synchronization errors, and obsolete drives. Require a cold start, continuous cycle test, sample-part measurement, and a recorded alarm history. FAQ Which machine is best for small precision parts? A Swiss-type CNC lathe is usually best for long, thin, high-volume precision components. Can a used lathe still hold tight tolerances? Yes, when spindle condition, axis repeatability, tooling, and thermal stability pass measured test cuts. What accuracy test should a buyer request? Request spindle runout, axis backlash, repeatability data, and measured samples produced from the target material. What faults create the highest repair risk? Spindle bearings, obsolete CNC drives, turret assemblies, and damaged ballscrews usually create the largest unplanned cost. Are China suppliers suitable for export projects? Yes, provided they demonstrate export experience, compliant packing, clear documents, spare-parts support, and defined after-sales service. Conclusion Match machine architecture to the part, verify condition with live tests, and price future support alongside purchase cost. Contact a reliable Chinese supplier for an inspected machine list and a current quotation.
-
Industries That Use Automatic CNC Lathe MachinesAutomatic CNC lathe machines support high-volume turned parts where repeatability, cycle time, and unattended running determine unit cost. They are widely used for shafts, pins, fittings, fasteners, bushings, and precision connectors. Core Industries and Part Requirements Industry Typical Parts Key Requirement Automotive Sensor bodies, pins, valve parts Stable batch accuracy and traceability Medical Implant components, instrument fittings Fine finish and burr control Electronics Connectors, terminals, camera rings Small-diameter precision Hydraulics Fittings, sleeves, valve spools Concentricity and sealing surfaces Aerospace Fasteners, lightweight alloy parts Material control and inspection records Machine Selection and Accuracy Retention Swiss-type automatic lathes suit long, slender workpieces and complex small parts; turret lathes are more economical for larger diameters and general production. A well-maintained used machine can retain practical production accuracy, but condition matters more than its nameplate year. Machine Type Best Fit Selection Risk Swiss-type Small, long precision parts Guide bushing and spindle wear Turret CNC lathe General turned components Turret indexing error Cam automatic lathe Very high-volume simple parts Limited changeover flexibility Inspection Before Purchase Checkpoint What to Verify Test cut Diameter stability, taper, roundness, surface finish Spindle Noise, heat, vibration, runout Axes and ballscrews Backlash, repeat positioning, lubrication Control system Alarm history, program operation, backup availability Tooling system Collets, holders, live tools, availability of replacements Common faults include spindle-bearing noise, hydraulic leakage, worn collets, servo alarms, and unstable bar feeding. Service life is extended by clean coolant, scheduled lubrication, correct bar stock, and prompt replacement of worn guide bushings and seals. FAQ Which industry benefits most from automatic CNC lathes? Automotive, electronics, medical, and hydraulics benefit most where many identical precision parts are required. Can a used automatic lathe still hold tight tolerances? Yes, after a test cut confirms spindle condition, axis repeatability, and thermal stability. What is the main risk in a low-priced machine? Hidden wear, obsolete controls, and unavailable parts can exceed the initial savings. How should buyers verify machine condition remotely? Request a live video test cut, measurement report, alarm screen check, and detailed machine serial information. Are spare parts available from Chinese suppliers? Reliable suppliers stock common consumables and can source compatible electrical, hydraulic, and tooling parts. Conclusion Select the machine by part geometry, required tolerance, service support, and verified condition, not price alone. Request a current quote and inspection package from a reliable Chinese supplier with export and spare-parts capability.
-
What Is an Automatic Lathe Machine Used For?Automatic lathe machines produce repeated turned parts with minimal operator intervention. They are used where cycle time, consistency, and low piece cost matter more than one-off flexibility. Primary Uses and Suitable Parts Cam-type automatic lathes suit high-volume simple parts; CNC automatic lathes handle more complex geometry, short-to-medium batches, and faster changeovers. Typical work includes shafts, pins, bushings, threaded fittings, connectors, screws, and small hydraulic or automotive components. Machine type Best use Typical risk Single-spindle cam automatic Very high-volume standard parts Cam wear and limited flexibility Multi-spindle automatic Maximum output for small parts Complex setup and costly repair CNC automatic lathe Precision mixed batches and complex profiles Control, servo, or hydraulic faults Accuracy, Service Life, and Fault Control A sound used machine can retain practical production accuracy when its bed, spindle bearings, collets, slides, and feed system are maintained. Check actual sample parts rather than relying only on nameplate tolerance. Well-serviced mechanical machines often remain productive for 15–25 years; CNC life depends heavily on spindle hours, control support, lubrication discipline, and crash history. Inspection point What to check Selection implication Spindle Noise, heat, radial runout Bearings may require major expense Slides and bed Backlash, scoring, taper on test cut Wear reduces repeatability Hydraulics/pneumatics Leaks, pressure stability, clamping Causes inconsistent cycle operation Electrical/control Alarms, cabinet condition, backup files Obsolete components increase downtime Practical Purchase Checks Run the machine through a full automatic cycle and verify safety interlocks. Measure runout, backlash, surface finish, and dimensional repeatability on a test part. Confirm bar capacity, tooling availability, power specification, and installation footprint. Request maintenance records, serial number verification, video inspection, and a spare-parts list. Used-Machine Cost Guide Category Indicative used price Best buyer Cam automatic lathe US$3,000–15,000 Standard fastener producers Multi-spindle automatic US$15,000–80,000 High-output component factories CNC automatic lathe US$12,000–70,000 Precision subcontractors Price varies with brand, age, condition, tooling, control generation, and overhaul status. A low purchase price can be false economy when commissioning, retrofit, or unavailable parts are ignored. Why Source From China Experienced China-based suppliers can offer broad used inventory, competitive export pricing, pre-shipment testing, crating, documentation, and consolidated shipping. Prefer suppliers able to provide applicable CE or other requested compliance documents, condition reports, remote troubleshooting, commissioning guidance, and stocked consumables such as collets, belts, seals, sensors, and electrical parts. FAQ What is an automatic lathe mainly used for? It efficiently manufactures repetitive round or bar-fed parts such as pins, fittings, screws, and shafts. Can a used automatic lathe still hold precision? Yes, when spindle condition, slide wear, alignment, lubrication, and test-cut results are acceptable. Which faults are most common? Spindle-bearing noise, slide backlash, hydraulic leaks, worn collets, electrical failures, and CNC alarm issues are common. Is a cam machine or CNC machine better? Choose cam machines for stable, very high-volume parts; choose CNC for frequent changes or complex dimensions. What documents should an exporter provide? Request specifications, test video, inspection report, packing list, export documents, and available certification records. Are spare parts available for older machines? Wear parts are often available, but confirm control and proprietary mechanical parts before ordering. Choose a reliable Chinese supplier that proves machine condition, export capability, and parts support. Request a current quote with test results and delivery terms.
-
Why Buy Used Automatic Lathe Machines from China?China is a practical sourcing market for used automatic lathes because buyers can access broad inventory, competitive refurbishment costs, and export-capable support. The value depends on disciplined inspection, not simply the lowest offer. Why Source Used Automatic Lathes from China? Chinese suppliers commonly stock cam-operated, Swiss-type, and CNC automatic lathes from domestic, Japanese, Taiwanese, and European brands. Export specialists can arrange crating, sea freight documentation, pre-shipment testing, and remote commissioning support. A properly rebuilt unit can provide 5–10 further years of productive service for standard precision parts. Machine type Typical used price Best use Selection risk Cam automatic lathe US$3,000–12,000 High-volume simple turned parts Cam and clutch wear Entry CNC lathe US$8,000–25,000 Flexible small batches Control or drive obsolescence Swiss-type CNC lathe US$18,000–70,000 Long, small precision parts Guide bushing and sub-spindle condition Accuracy, Life, and Common Faults Accuracy retention is governed by spindle bearing condition, bedway wear, ball-screw backlash, turret repeatability, and thermal stability. For a sound used CNC machine, practical repeatability should be verified against the supplier’s stated specification; do not rely on a static dial reading alone. Common faults include spindle noise, hydraulic leakage, lubrication alarms, worn collets, unstable servo drives, and intermittent encoder errors. Pre-Purchase Inspection Checklist Check Acceptable evidence Running test Video of cold start, speed changes, and automatic cycle Test part Measured diameter, runout, surface finish, and repeatability Mechanical condition No abnormal spindle vibration; controlled backlash and turret play Control system Alarm history, backup files, electrical cabinet photos Service history Repair records, replaced parts, and inspection report China Supplier Value and Risk Control Established China-based suppliers offer cost performance through local sourcing and refurbishment labor, often at 30–60% below comparable new equipment. Prioritize suppliers with export records, quality-management certification, clear machine serial records, acceptance testing, multilingual manuals, and defined after-sales response. Confirm availability and lead time for bearings, collets, belts, seals, drives, and control boards before payment. Cost item Used China supply New-equipment alternative Initial investment Lower Higher Delivery flexibility Stock-dependent, often fast Factory lead time Warranty scope Usually limited, negotiate clearly Usually broader Technology life Must verify controls and parts Current platform FAQ Are used automatic lathes from China reliable? They can be reliable when inspected under load, supplied with test results, and supported with service parts. How much accuracy loss is acceptable? It depends on the workpiece tolerance; require a machined sample and repeatability test matching your production need. Should I buy refurbished or as-is? Refurbished machines reduce startup risk, while as-is units suit buyers with in-house maintenance capability. What certifications matter? Supplier quality-management certification, export documentation capability, and applicable electrical compliance records are useful checks. Which spare parts should be ordered first? Order wear items such as collets, belts, seals, filters, sensors, and critical control backups with the machine. Can a supplier provide remote support? Export-oriented suppliers should offer video troubleshooting, wiring diagrams, parameter backups, and spare-parts identification. Buy on Verified Condition, Not Price Alone Request a live inspection, test-cut report, parts list, and written after-sales terms. Contact a reliable Chinese supplier for current stock and a quotation matched to your part size, tolerance, and output target.
