Used Zeiss PRISMO 7/9/5 Verity CMM Available for Immediate Inspection
Author：JINYI Date：2026-05-15
This 2020 Zeiss PRISMO 7/9/5 verity Coordinate Measuring Machine (CMM) is in stock and available for immediate inspection in Wuxi. Engineered for high-precision quality control, this unit features a 700 x 900 x 500 mm measurement volume, making it an ideal solution for facilities requiring rigorous dimensional verification. Renowned for high-speed scanning and exceptional accuracy, this machine is well-suited for automotive, aerospace, and precision manufacturing applications. The unit is ready for on-site inspection by appointment.
Stock Status and buying value
This 2020 model (Stock ID: 811949) offers a strategic balance of modern metrology performance, current software compatibility, and cost-efficiency. Acquiring a pre-owned Zeiss PRISMO verity allows manufacturers to integrate high-end measurement capabilities into their production lines while bypassing the extended lead times typical of new capital equipment procurement.
The machine is available for immediate on-site inspection. We encourage procurement teams and quality managers to schedule an appointment to verify the condition of the granite table, the probe system, and the overall operational status of the machine.
Key Specifications and Production Readiness
The Zeiss PRISMO verity series is engineered for high-speed, high-precision measurement. Review the specifications below to ensure this unit aligns with your specific part tolerances and throughput requirements.
| Parameter | Specification |
|---|---|
| Model | PRISMO 7/9/5 verity |
| Measurement Range (X/Y/Z) | 700 x 900 x 500 mm |
| MPE (E0) | 0.7 + L/400 μm (at 19°C–22°C) |
| Repeatability (R0) | 0.6 μm |
| Scanning Error (THP) | 0.9 μm |
| Measurement Time (MPT) | 40 s |
| Form Error (RONt) | 0.7 μm |
Production Interpretation:
- Measurement Volume: The 700 x 900 x 500 mm envelope is optimized for medium-sized components, including engine blocks, complex housings, and aerospace sub-assemblies.
- Accuracy & Repeatability: With an E0 of 0.7 + L/400 μm and R0 of 0.6 μm, this machine is designed for high-tolerance parts where micron-level deviations are critical.
- Throughput: The MPT of 40 seconds indicates high-speed scanning capability, essential for production lines requiring 100% inspection or high-volume sampling without creating bottlenecks.
which operations should consider this machine now
The Zeiss PRISMO verity is a versatile workhorse in the metrology industry. Its design prioritizes flexibility, allowing it to adapt to diverse measurement tasks across multiple sectors.
Automotive and Aerospace
For manufacturers producing gearboxes, turbine blades, or structural castings, the PRISMO’s ability to handle complex geometries with high repeatability ensures that parts meet stringent safety and performance standards.
Medical Device Manufacturing
The precision offered by the 0.7 μm form error (RONt) makes this CMM ideal for checking the circularity and profile of medical implants and precision instruments, where dimensional integrity is non-negotiable.
Electronics and Mold Making
In mold making, where the accuracy of the cavity and core directly impacts the quality of the final molded part, this machine provides the necessary verification to reduce scrap rates and optimize tooling adjustments.
Inspection Points Before Purchase
To ensure this machine meets your production requirements, we recommend the following inspection steps during your site visit:
- Granite Table Integrity: Inspect the granite surface for any scratches, chips, or signs of improper handling that could affect the stability of the measurement setup.
- Probe System Functionality: Verify the movement and calibration status of the probe head. Ensure there is no audible grinding or erratic movement during test runs.
- Air Supply and Pressure: Check the air bearings. The system requires clean, dry, and stable air pressure to operate within the specified accuracy range.
- Software and Controller: Confirm the controller version and software compatibility with your existing CAD/CAM workflows.
Why This Machine is worth considering now
The Zeiss PRISMO 7/9/5 verity is recognized industry-wide for its stability and measurement speed. In the current market, securing a 2020 unit in excellent condition offers a significant advantage for companies looking to rapidly upgrade their quality assurance capabilities. This machine is a long-term asset for maintaining consistent quality. Available for immediate inspection and shipment, it is a practical solution for production managers addressing urgent capacity requirements.
Frequently Asked Questions
Q: Is this machine currently available for inspection?
A: Yes, this unit is in stock. Please contact us to schedule an appointment for a physical inspection and operational demonstration.
Q: What type of production environment is this CMM best suited for?
A: This machine is highly versatile, suited for high-precision environments including automotive, aerospace, medical device, and mold-making facilities that require high-speed scanning and sub-micron accuracy.
Q: How does the 40s MPT affect production throughput?
A: The 40-second Measurement Time (MPT) is optimized for high-throughput environments. It allows for faster data acquisition compared to standard CMMs, which helps minimize inspection bottlenecks in high-volume production lines.
Q: What is the primary advantage of the PRISMO verity series?
A: The PRISMO verity series is known for combining high measurement speed with excellent accuracy, making it a robust choice for both lab-grade metrology and high-speed production floor quality control.
More Articles
-
Boring Machine Applications in Construction Equipment RepairWhen a pin joint develops play, replacing the pin alone may not solve the problem. Wear can leave the housing bore oval, tapered or out of alignment. A boring machine for construction equipment repair restores the bore so the joint can be fitted with a correctly sized pin or bush. This work is often performed on the machine in the field when removing a large component would add substantial downtime. Where bore wear occurs on construction equipment Repeated articulation, impact loading, inadequate lubrication and contamination can wear the bores that support pins and bushes. The repair target is the damaged joint bore, not simply the visible pin. Before machining, the technician needs to identify the joint layout, access, material condition and the relationship between connected bores. Equipment Typical bore Repair purpose Excavator Boom, arm and bucket pin bores Restore pin fit and joint alignment Loader Lift-arm and bucket pivot bores Correct wear at heavily cycled pivots Backhoe Dipstick, boom and stabilizer pin bores Re-establish fit across linkage joints Crane Boom and linkage pivot bores Address wear at structural articulation points Hydraulic equipment Cylinder-end and mounting pin bores Restore the connection between cylinder and structure How boring repair addresses the damage Construction equipment boring repair typically starts with inspection and measurement. The repair team checks bore diameter, roundness, wear pattern and alignment with related bores. If the housing is suitable for repair, a portable line boring setup machines the damaged bore to a controlled, consistent diameter. Depending on the repair plan, the bore may then receive a bush, or be finished to suit the specified pin or bearing arrangement. Where two or more bores form one pivot line, their alignment matters as much as the individual diameters. Machining them in a common setup can help restore the intended axis. The required dimensions and fit should come from the equipment specification or an agreed repair drawing; they should not be assumed from the pin size alone. Field conditions shape the repair plan Access, nearby structures, available setup space and the condition of the surrounding material affect whether on-site boring is practical. Cracks, severe distortion, damaged welds or a bore near a highly loaded structural area may require additional inspection or a different repair sequence. The machine must also be isolated and securely supported before work begins, following site and equipment safety procedures. For a field assessment, document the machine and joint location, report the symptoms, and provide measurements or photographs where available. Confirm whether connected bores need to be machined on the same axis, whether a bush will be installed, and what final fit is required. These details help establish a realistic repair scope before equipment is mobilized. Frequently asked questions Which excavator parts commonly need bore repair? Boom, arm and bucket pin joints are common locations, as are other pivot connections showing looseness or uneven wear. Inspection determines whether the bore, pin, bush or several parts need attention. Can loader pivot bores be repaired on site? Often, but feasibility depends on access, setup conditions, damage severity and the required machining sequence. A site assessment can establish whether portable boring is appropriate. Does every worn bore need a new bush? No. The repair method depends on the equipment design, bore condition and specified fit. Confirm the intended finished dimensions and component arrangement before machining.
-
Boring Machine Cost Guide: What Affects the Price of Industrial Equipment?Two boring machines intended for similar repair work canreceive very different quotations because the price reflects more than the machine’s basic size. Machine type, working range, drive power, accuracy requirements, tooling and included automation all affect the final configuration. To compare a boring machine price accurately, compare the scope of supply and the job requirements, not just the headline figure. What drives the quotation? Price factor Why it affects cost Details to specify Machine type and setup Portable systems and larger stationary equipment have different structures and intended applications. Equipment type, work location and setup constraints Bore size and machining range Required diameter, bar length and travel determine the working envelope and compatible components. Minimum and maximum bore diameter, machining length and access Power and duty Drive requirements depend on the material, cutting conditions and expected workload. Workpiece material, typical jobs and operating frequency Accuracy and tooling Accuracy requirements and the tooling package influence component selection and what must be supplied. Required results, cutters, mounts and other tooling needs Automation and customization Controls, optional functions and non-standard configurations add scope to the build. Required automation, special interfaces and quantity Configuration matters more than a bare price A lower-priced machine may have a narrower machining range, fewer included tools or less automation. A higher quotation may include a broader configuration or options that are unnecessary for a particular job. Neither price alone establishes suitability. For a portable boring machine price comparison, check that the quoted setup can reach the bore, fit the available work area and perform the required operation. Accuracy should also be described in terms of the work to be done. Share the required result and relevant workpiece details so the supplier can quote a configuration against the application. Avoid comparing quotations that assume different tooling, accessories, automation or customization. Prepare information for a useful quote For a meaningful boring machine cost estimate, provide the bore diameter range, machining length, material, workpiece or equipment details, site access constraints and expected operating frequency. List required tooling, accuracy expectations, automation and any special mounting or interface requirements. Include the purchase quantity and identify which accessories should be included. Ask suppliers to show the proposed configuration and included items in the quotation. This makes differences easier to trace and helps prevent a low initial figure from omitting components needed for the intended work. Submit the same job information to each supplier when comparing offers. Frequently asked questions Why is one boring machine much cheaper than another? The machines may differ in type, working range, power, included tooling, accuracy-related configuration, automation or customization. Compare the quoted scope against the same application before judging the difference. What information is needed to quote a boring machine? Provide the required bore diameters and machining length, material, workpiece and site constraints, expected use, accuracy needs, tooling and automation requirements, customization details and order quantity. These details help suppliers quote a configuration suited to the job.
-
Used Automatic Lathe Machine for Sale WorldwideUsed automatic lathe machines provide a practical route to high-volume turning capacity without the lead time and capital cost of new equipment. For worldwide buyers, condition verification and supplier capability determine whether a low purchase price becomes a reliable production asset. Used Automatic Lathe Machine for Sale Worldwide What Buyers Should Assess A well-maintained cam-operated or CNC automatic lathe can retain stable repeatability for years when spindle bearings, guideways, collets, lubrication, and control components are within specification. Typical remaining service life is 5-12 years for a properly rebuilt machine, but heavily worn feed systems, obsolete controls, and unavailable parts create material selection risk. Machine type Typical work Used price range Main risk Cam automatic lathe Small pins, screws, fittings US$3,000-15,000 Cam and clutch wear Single-spindle CNC lathe Precision shafts, bushings US$8,000-35,000 Control and servo age Swiss-type CNC lathe Medical and electronics parts US$18,000-80,000 Guide bushing accuracy Inspection Before Shipment Checkpoint Acceptance focus Spindle Measure runout, noise, heat, and speed stability Axes and slides Check backlash, repeatability, way damage, and lubrication Tooling system Confirm collet, turret, feeder, and change-part availability Trial cutting Verify diameter, surface finish, cycle time, and scrap rate Electrical system Test alarms, drives, safety devices, and documentation Request a cold-start video, spindle runout report, sample-part test, machine serial number, and packing photographs. Accuracy claims should be supported by measured results, not appearance or repainting. China Supplier Value Established China-based suppliers combine broad used-machine sourcing with competitive refurbishment costs and export packing experience. Prefer suppliers able to provide inspection records, relevant quality certification, export documents, remote commissioning support, and stocked wear parts such as collets, belts, seals, sensors, relays, and hydraulic components. Cost item Direct as-is purchase Inspected Chinese supplier Initial price Lower Moderate Condition evidence Often limited Test data and video Export support Buyer-managed Crating and documentation After-sales response Uncertain Parts and technical support FAQ Can a used automatic lathe hold tight tolerances? Yes, after measured verification, alignment, and trial cutting; condition matters more than machine age. What accuracy should be checked? Check spindle runout, axis backlash, repeat positioning, workpiece diameter variation, and surface finish. Are old controls a concern? Yes. Confirm backup availability, drive condition, electrical drawings, and an upgrade path before purchase. Should buyers choose rebuilt equipment? Choose rebuilding when it includes documented replacement of wear components and a witnessed test, not cosmetic painting alone. Which spare parts should be ordered initially? Order consumable seals, belts, collets, sensors, contactors, filters, and model-specific tooling where available. Can a Chinese supplier arrange worldwide delivery? Experienced exporters can arrange seaworthy packing, shipping documents, and remote installation guidance. Choose a reliable Chinese supplier that can prove machine condition, support export delivery, and quote the right configuration for your current parts. Request a current quotation with inspection data before ordering.
-
Can you ship used machinery to my country and handle import formalities?Many international business owners, factory operators, and construction contractors ask the same question when sourcing second-hand equipment: Can you ship used machinery to my country and handle full import formalities? If you are looking for reliable one-stop used machinery export and import clearance services, the answer is absolutely yes. Professional used machinery exporters offer global shipping and full import document processing to save you time, cost, and cross-border trade risks. Global Shipping Service for All Types of Used Machinery We support worldwide shipping for all categories of used machinery, including construction machinery, industrial processing equipment, agricultural machines, and mechanical tools. No matter your destination country in Asia, Africa, Europe, North America, or South America, we can arrange safe, fast, and cost-effective shipping solutions. We provide flexible logistics options including sea freight, air freight, and container shipping. All used machines will be professionally cleaned, inspected, packaged, and fixed inside containers to avoid damage during long-distance transportation. We also offer cargo tracking until the goods safely arrive at your local port. Full-Service Import Formality Handling Most overseas buyers lack experience with complex cross-border import procedures for used machinery, which has stricter customs rules than new equipment. Our team can fully handle all import and export formalities on your behalf. We complete official export customs declaration, prepare commercial invoices, packing lists, certificates of origin, and official inspection documents required by international customs. Our staff is familiar with different countries’ import policies for used machinery, including restriction standards, quarantine rules, and tax declaration requirements. We assist with every step, from export filing at the origin port to import guidance at your destination port. We can sort out compliance documents, submit customs applications, and solve common clearance problems that often cause delays or fines. Why Let Professionals Handle Your Import Formalities Used machinery import involves strict policy audits. Missing documents, incorrect declaration information, or non-compliant filing will lead to customs detention, port storage fees, cargo return, or expensive penalties. By choosing our one-stop service, you can avoid complicated paperwork and tedious communication with customs authorities. You do not need to learn professional trade knowledge or prepare complex files by yourself. We ensure all formalities comply with local import laws, making customs clearance fast and smooth. What Benefits You Get from Our All-in-One Service First, you save huge time costs. We take charge of the entire shipping and clearance process, allowing you to focus on your factory production and project progress. Second, you reduce trade risks effectively. Our standardized document processing avoids clearance failures and legal risks. Third, you enjoy transparent pricing with no hidden charges. We provide detailed cost lists for machinery inspection, customs declaration, logistics, and service fees before shipment. Finally, we offer after-arrival guidance to help you pick up cargo quickly. Final Conclusion In summary, we can ship qualified used machinery to almost every country globally and provide full support for import formalities. Our integrated shipping and customs clearance service makes international used machinery procurement simple, safe, and efficient. If you plan to import second-hand equipment, choose our professional service for a worry-free cross-border transaction.
