SCHIESS 800/1300NC/C Lathe

Worktable diameter: 8000 mm
Maximum turning diameter (at the front position of the column) : 8000 mm
Maximum turning diameter (at the rear position of the column) : 13,000 mm
Maximum height of workpiece: 7500 mm
The maximum load of Worktable center is 400 tons
Maximum torque of Worktable: approximately 80,000 kgm
The maximum load-Load of the support bracket is 10,000 kg
The speed of Worktable (spindle) is point 4 gears:
Gear I: 0.14 to 1.00 rpm
Gear II: 1.12 to 2.50 rpm
Gear III: 2.80-6.30 rpm
Gear IV: 7.10-18.00 rpm
Potentiometer adjusWorktable range: 70% - 100% stepless fine adjustment within the range
Horizontal travel S of the column: approximately 2500 mm
Column rapid movement speed: 300 mm/min
Column precision movement speed: 4 mm/min
Vertical travel F of the crossbeam: approximately 6900 mm
Crossbeam rapid movement speed: 410 mm/min
Horizontal travel G of the bracket: maximum 5030mm, the bracket can travel from the center all the way to the position with a workpiece diameter of 9000mm
Vertical travel J of the ram: maximum 3500 mm
The cross-sectional Footage of the ram are 420 × 380 mm
CNC System: Siemens 840D